A ROOM THAT WORKS FOR YOU
Planning Kitchen Faucet and Accessory Holes
Finalize every countertop-mounted fixture before fabrication.

Make one list of every countertop-mounted item
List the faucet, separate handles if applicable, soap dispenser and any other proposed accessory. Distinguish items that belong through the countertop from those mounted through the sink. Bring exact model information to the countertop review instead of relying on a general description such as a standard kitchen faucet.
Check operation against the wall and window
Review handle travel, spout reach and clearance behind the faucet with the actual sink location and backsplash. If a window or ledge is nearby, show it on the drawing. Confirm that every item can operate and be cleaned in the proposed position before hole locations are approved.
Approve the arrangement before the top is cut
Have the fabricator and installer verify the fixture package and spacing as part of the final measurement process. Keep the products available as required for that review. A later accessory choice may be difficult to accommodate, so settle what is included and what is intentionally omitted before fabrication.
Before you decide
Can an extra hole be added after countertop installation?
Possibly, but the material, access and location must be reviewed by the countertop professional. Do not assume later drilling is simple or that a misplaced hole can disappear. Finalize the intended fixture package before the top is fabricated whenever possible.
Product guidance
Check the instructions for your exact product before ordering or installation.
Manufacturer guidance