RenoPro InteriorsRenoPro InteriorsDO IT ONCE. DO IT RIGHT.

A ROOM THAT WORKS FOR YOU

New Flooring and Stair Riser Heights: Plan the Whole Flight

Changing the floor at the top or bottom of a stair can change the step you take even when the staircase itself is untouched. Review the complete flight before ordering flooring or replacement treads. A matching color at the landing does not establish a safe, consistent stair arrangement.

Wood-tone flooring connecting an open living room and kitchen
RenoPro project imagery, also featured in our installation guide. See our work.

Measure finished surfaces together

Ask the responsible professional to record the existing rises and the proposed finished height of both landings and every affected tread. Include removal layers, new underlayment, flooring and tread overlays. Wood Stair Co.'s retrofit guidance highlights the first and last rise as potential trouble spots. An estimate based only on the number of treads can miss a change caused by flooring in the adjoining room.

Have the applicable requirements checked

Request a review of the actual stair configuration and local requirements before approving the detail. A generic dimension copied from another jurisdiction is not a project-specific determination. Existing stairs, altered stairs and different building uses may need different review. Ask who handles any required inspection or design input. If the proposal relies on leaving an unusual first step unchanged, have that decision explained rather than treating it as an inevitable finish detail.

Compare solutions before selecting the surface

If the planned floor creates an unsuitable rise, compare an approved change to the landing assembly or stair scope before installation. Do not improvise a small ramp at a stair edge or add a loose mat to disguise the difference. Include trim, nosings, handrail-related coordination and the time the flight is unavailable. Record the agreed finished measurements so the final walkthrough can compare the built result with the plan.

Before you decide

Does adding the same thickness to every tread solve the issue?

Not necessarily. The upper and lower landing finishes also affect the first and last rises. Review all finished surfaces as one stair system.

Can a flooring installer automatically approve stair compliance?

Do not assume that. Confirm who is qualified and responsible for the applicable review, and keep any required specialist work separate from the ordinary flooring scope.

Product guidance

Check the instructions for your exact product before ordering or installation.

Wood Stair Co.: Step Height With New Retro TreadsStairbuilders and Manufacturers Association