RenoPro InteriorsRenoPro InteriorsDO IT ONCE. DO IT RIGHT.

A ROOM THAT WORKS FOR YOU

Planning a Shower with More Than One Outlet

A fixed head, hand shower and body spray create different combinations of use. Decide which outlets must operate together, then have the complete valve and supply arrangement reviewed before purchasing a collection of matching fixtures.

RenoPro shower tile work with blue-green wall tile, a niche and a mosaic floor
RenoPro shower tile work, photographed during installation. See our work.

Write down the combinations you expect to use

Make a short operating list: head alone, hand shower alone, or selected outlets together. Separate options you would use occasionally from combinations essential to your routine. Give this list to the installer. A display containing several matching pieces does not establish that the selected controls will operate every combination you have pictured.

Review the complete system instead of individual fixtures

Provide exact models for the mixing valve, transfer or diverter control, and every outlet. Ask the plumber to confirm compatibility and evaluate the available supply and hot-water arrangement for the intended use. Moen's planning guidance treats shower-system selection as a coordinated decision. Adding more visible outlets does not by itself establish satisfactory performance at each one.

Make operation understandable from inside the shower

Label a simple sketch with what each control does and where each spray points. Check that another household member can understand the setup without memorizing a complicated sequence. Review cleaning reach and the movement of the hand-shower hose too. Before wall work is closed, confirm that the approved component list and operating choices have not changed through substitutions.

Before you decide

Can I add another showerhead without changing anything else?

That depends on the existing system and the way you want both outlets to operate. Have the valve, connections and supply reviewed first. A matching finish or compatible-looking fitting does not establish that the current arrangement supports the new operating requirement.

Product guidance

Check the instructions for your exact product before ordering or installation.

Manufacturer guidance